procharger with ATI balancer
Thread Starter
TECH Fanatic
iTrader: (27)
Joined: Apr 2007
Posts: 1,277
Likes: 2
From: Collinsville, IL
procharger with ATI balancer I know when you run this setup you need some longer bolts because the threads are not drilled into the ATI 10% underdrive balancers anymore. However, I have no idea which bolts need to be changed. Are they bolts that come with the procharger or are they bolts that come with the ATI balancer?
Thread Starter
TECH Fanatic
iTrader: (27)
Joined: Apr 2007
Posts: 1,277
Likes: 2
From: Collinsville, IL
I am thinking the bolts that hold the ATI balancer to the procharger crank pulley need to be longer. I could be wrong though. I remember ATI changed their balancer years back and I needed to change something but I do not really remember what.....
cant help you there really i ordered my whole setup from SDCE so they sent what i needed
does your ati balancer have the ac pulley? I bolted the main balancer to the hub with the 3 shorter bolts and the 3 longer bolts that go through the balanacer and the hub to grab the ac pulley is the bolts I used for my supercharger crank pulley. That help?
