2 step help
Thread Starter
11 Second Club
iTrader: (12)
Joined: Apr 2007
Posts: 490
Likes: 0
From: Lexington, KY
2 step help I know this is the FI section but I figure since it 100% relates to FI it would be better answered here.
I have an lt1, and a d1sc. My ign box has a 2 step in it and all i have to do is provide it with 12 volts. My clutch pedal has 2 switches on it, one that opens when the clutch is depressed , and one that closes when the clutch is at the floor. I used my multimeter and could not get a decent reading out of the wires that goto that black bottom switch. I hooked the 2 step to it anyways in hopes of it just working but i seem to be only getting 1 volt or .10 volts out of it? when i hold the key over and press this switch by hand the car cranks and starts...
is this a 12 v switch? or is it a ~1v switch? i know the 2 step works because i touch it to any known 12v source and the car limits at what i have the 2 step set at.
any ideas?
I have an lt1, and a d1sc. My ign box has a 2 step in it and all i have to do is provide it with 12 volts. My clutch pedal has 2 switches on it, one that opens when the clutch is depressed , and one that closes when the clutch is at the floor. I used my multimeter and could not get a decent reading out of the wires that goto that black bottom switch. I hooked the 2 step to it anyways in hopes of it just working but i seem to be only getting 1 volt or .10 volts out of it? when i hold the key over and press this switch by hand the car cranks and starts...
is this a 12 v switch? or is it a ~1v switch? i know the 2 step works because i touch it to any known 12v source and the car limits at what i have the 2 step set at.
any ideas?
