stock fuel system
Thread Starter
Teching In
Joined: Aug 2009
Posts: 3
Likes: 0
From: flowery branch
stock fuel system i bought a D1SC procharger kit and now i want more, how much horsepower can the stock system hold with the inlive pump from porcharger. i have 60lb injectors and i know ill have to go up jus wanna know about how much power the one i have now will hold
I have the D1SC as well and put a racetronics in the tank (Procharger told me that was a better setup than the pump that came with my S/C) and I only made 486 RWHP and did not have enough fuel. Anytime I got to 5500 rpms my fuel pressure dropped to 40psi. i have since ordered a twin pump system from Lonnies Fuel Systems that is said to be good to 850RWHP
Thread Starter
Teching In
Joined: Aug 2009
Posts: 3
Likes: 0
From: flowery branch
i have the one that came with it and it makes 562 on a mustang dyno with a stock bottom end. im wantin to put low compression pistion in it and bumpin the boost on up so how much is the twin setup?
I dont remember right off hand but I think it tells on his website just do a search for Lonnies Fuel Systems. I know several people that are running his systems and have not had a minutes trouble and if you call him he will steer you in the right direction
I had 60# injectors walbro 255 intank and a hot wire kit and couldn't make it past 5,500 rpms @ about 500 hp. Fuel pressure was around 30 psi. Got a lonnies double pumper and the fuel pressure doesn't budge from 60 #'s all th e way to 6,700 rpms.
http://www.lonniesperformance.com/
http://www.lonniesperformance.com/
