Ok, so up until a few weeks ago I was running a 3.3" pulley on my MP112 and making 8 lbs. of boost and everyhing was great. I decided to do a cam swap and went with a 220/226 xer lobes on a 114 lsa. Finished the cam swap and lost 3 lbs. of boost. Went to the track last Friday and went 13.70 @ 99. Before the cam and SC3000 cnverter I went 13.62 @ 99. So I actually went a little slower with the new cam on less boost. So yesterday I decided to pulley farther down to a 3.1" and get my boost back to where I was before the cam swap. STILL ONLY SHOW 5 lbs! What the hell is going on????? I can understand losing some boost with the cam swap whether it be from too much overlap or flowing more air or whatever, but adding a smaller pulley and still not gaining boost back! I am so confused............. Any help is appreciated.