Looking for Boosted C5 Pics!!
Thread Starter
Teching In
Joined: Nov 2009
Posts: 17
Likes: 0
Looking for Boosted C5 Pics!! I'm looking into a twins kit for my C5 Z06, and I would like to see what is out there.
If you have pics, that would be great. I link to a build article would help too.
What are your opinions on the kits you have, and others you have seen?
If you have pics, that would be great. I link to a build article would help too.
What are your opinions on the kits you have, and others you have seen?
http://exoticperformanceplus.com/projectCar.php?car=26
Here is one we did at the old shop that is no longer open. We did this install back in 2004 or so, and the Corvette is still running just fine for it's owner. Bob
Here is one we did at the old shop that is no longer open. We did this install back in 2004 or so, and the Corvette is still running just fine for it's owner. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
APS low mount. bad turbos poor plumbing, Your turbo selection is very limited do to the flange on the manifold.
PTK or ebay PTK hard to find and very cramped top mount I have heard of people running up to 76's on them. More involved install, custom alt is required etc.
TTIX low mount t3 flange i think precision 6265's fit without modification stock kit is good around 900rwhp. Very proven setup
HP twin good luck. Read about people having a hard time getting all the part's in a reasonable amount of time.
PTK or ebay PTK hard to find and very cramped top mount I have heard of people running up to 76's on them. More involved install, custom alt is required etc.
TTIX low mount t3 flange i think precision 6265's fit without modification stock kit is good around 900rwhp. Very proven setup
HP twin good luck. Read about people having a hard time getting all the part's in a reasonable amount of time.
Last edited by sbcgenII; Jul 28, 2010 at 07:32 AM. Reason: more info
