fast 92 vs victor jr. and elbow
fast 92 vs victor jr. and elbow ok guys i have a fast 92 combo on my setup and am thinking of trading it for a victor jr and elbow ill be keeping my 92mm tb
setup is as follows
fully forged 346
eagle crank
crower rods
mahle pistons
afr 225s small bore
comp cams 224 224 .609 .619 116lsa 114icl
and a truck manifold kit with pt76gts
i have heard the FAST isnt a good fi intake because it can crack and bust especially under the amount of boost i plan on running 18-20 ish (if it dont max before that) my question is how well will the victor jr match up to my afrs and how well does it flow? is it a good deal?
setup is as follows
fully forged 346
eagle crank
crower rods
mahle pistons
afr 225s small bore
comp cams 224 224 .609 .619 116lsa 114icl
and a truck manifold kit with pt76gts
i have heard the FAST isnt a good fi intake because it can crack and bust especially under the amount of boost i plan on running 18-20 ish (if it dont max before that) my question is how well will the victor jr match up to my afrs and how well does it flow? is it a good deal?
The Vic Jr would be fine there supposed to have better top end pull it also should fit your AFR's as far as i know and for the elbow im running a low profile i didnt want the restriction of the ultra low and i dont mind a little cutting of the cowl.....
The FAST 92 intake is vastly superior to the older FAST 90 intake, I highly doubt you would encounter any problems with it at 20 psi of boost. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
