cog tooth profile
Thread Starter
9 Second Club
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
cog tooth profile I had pulleys made recently, but I'm a little concerned. Tooth profile isnt exactly the same as the original Vortech one.
Black is 34T, silver is 30T. Belt Gates 1600-8M-50 ( 1600mm long, 8M profile and 50mm wide. HTD teeth )
Do I need to be concerned ? Belt is a very tight fit into the black pulley
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Black is 34T, silver is 30T. Belt Gates 1600-8M-50 ( 1600mm long, 8M profile and 50mm wide. HTD teeth )
Do I need to be concerned ? Belt is a very tight fit into the black pulley
Uploaded with ImageShack.us
Uploaded with ImageShack.us
