Twin Intercooler Setup
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Jun 2010
Location: Brownsville, TX
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Twin Intercooler Setup
Has anyone tried setting up a pair of intercoolers this way but in a 4th Gen Camaro.
I got the idea from a C5 Corvette turbo kit sold by this company https://www.raceshop2000.com/store/p...7d5cf18d539c68
I was thinking of maybe setting up two small intercoolers inside each corner of the front bumper and cutting up an inlet like this on each side:
and then cutting a few large vent holes on the inner fender well to let the air escape giving it a good flow thru the intercooler to cool the intake charge.
Has anyone tried this or has had a similiar idea?
I got the idea from a C5 Corvette turbo kit sold by this company https://www.raceshop2000.com/store/p...7d5cf18d539c68
I was thinking of maybe setting up two small intercoolers inside each corner of the front bumper and cutting up an inlet like this on each side:
and then cutting a few large vent holes on the inner fender well to let the air escape giving it a good flow thru the intercooler to cool the intake charge.
Has anyone tried this or has had a similiar idea?
#2
FormerVendor
My 96SS was this way some time ago. Scroll to the bottom- http://www.ls1speed.com/intmd8.cfm
You'll be trading intercooler efficiency for engine cooling system and a/c efficiency.
You'll be trading intercooler efficiency for engine cooling system and a/c efficiency.