charged 434

iTrader: (2)

who makes a cog set up for f1c. my 8 rib will not keep from slipping. had the blower pulley coated and it still will not keep from slipping. was thinking about going turbo, but ryan at RPM really want to see this thing make some power. and i really like the way it sounds.

Jimmy P

iTrader: (177)

what type of setup do you have now? what type of car? I made good power out of my F1C blower using the SDCE tensioner.
The new Astor tensioner setup is supposed to be real good as well, although I haven't used that one myself.

Captain_Stabbin

your too close to give up now!

charged 434

iTrader: (2)

i guess its a standard pulley system that came with the blower. its on a 94 camaro. it sits down low on the drver side. the tentioner is on the blower bracket. so the belt is short , and tight as hell. it made 800 or so with the belt slipping like hell. Ryan is going to try a different belt today and see if that helps any.

Bob@BruteSpeed

iTrader: (16)

I talked to RPM yesterday about your problems with the belt slipping, but I didn't know it was on an LT1. ProCharger has an LT1 12 rib serpentine combination but you might want to look into the cog system that "The House Of Boost" makes, as it will take care of your belt slippage. Bob

charged 434

iTrader: (2)

Bob its on a lsx block. I changed it over to ls2 or what ever it is now. Yeah he said he talked to you. Will that cog kit u have work

Bob@BruteSpeed

iTrader: (16)

Good deal! The Aster bracket that I have will work for you, here is a link to it. http://shop.brutespeed.com/Aster-Aut...er-Bracket.htm

The cog kit that we made at EPP is no longer being made, but the Aster bracket will do the job for you. Thanks. Bob