Cam for SBC NON LS
03-07-2011, 06:29 AM
#1
Cam for SBC NON LS Bought all my pistons bolts gaskets etc... Now thinking of a new cam. I will be using D1sc approx 10-12 PSI AFR 195's, Any cam suggestions?? Id like a nice lump to it and I need higher LSA. This is for a NON LS motor. I know i came to the right place on this board!!! Thanks guys!! I know this quest is asked often but didnt see a NON LS setup. So easy on the comments, and yes I did a search!!!
03-07-2011, 07:09 AM
#2
Staging Lane
Join Date: May 2009
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Bought all my pistons bolts gaskets etc... Now thinking of a new cam. I will be using D1sc approx 10-12 PSI AFR 195's, Any cam suggestions?? Id like a nice lump to it and I need higher LSA. This is for a NON LS motor. I know i came to the right place on this board!!! Thanks guys!! I know this quest is asked often but didnt see a NON LS setup. So easy on the comments, and yes I did a search!!!
Comp cam 234-242-612-615 lsa 115+ 4 a bit radical with a nasty bite, may be too much for the small supercharger and heads you have
03-07-2011, 06:55 PM
#3
How many CI are you running? Isky has a shelf grind 225/234, .540/.565", 112lsa. That is with 1.6: rocker. I have been 460hp NA with that cam in a iron vortec headed 355, 700hp in a 195cc headed 383 with a 2.2L non I/C whipple 10psi and 835hp same engine with a I/C 3.3L whipple @12psi. This is Fwhp which 800fwhp on this dyno runs mid 9's @142mph @3700lbs.
