Where did you reference your bypass valve for vacuum.
Where did you reference your bypass valve for vacuum. With the Big Red race valve, i got some vacuum tubing and 2, 1/4" push-to-connects that were threaded on one side. one goes into the race valve and the other to where..
i have read the sticky but still unsure as to my build where ima reference these pieces to.
Boost ref. -- FPR can go to intake as it sees boost and vac.
Race Valve -- Not sure
Boost gauge -- Brake booster
alkycontrol -- brake booster
Thanks and i appologise for my ignorance
i have read the sticky but still unsure as to my build where ima reference these pieces to.
Boost ref. -- FPR can go to intake as it sees boost and vac.
Race Valve -- Not sure
Boost gauge -- Brake booster
alkycontrol -- brake booster
Thanks and i appologise for my ignorance
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
You need your reference to be from the manifold. It needs to see vacuum and boost since that is what opens and closes the valve. I ran mine from the port where the EVAP was. Its a perfect location if you get rid of the EVAP crap.
