msd 6010 timing map starting point??
msd 6010 timing map starting point?? Need a little help on where i should start on the timing for the MSD 6010. setup: lq4 stroked to 402, blowthrough csu on e-85 with FMIC, 9.71 compresson, victor intake, mild ported stock heads, cam is .600int .602exh-230int 234exh on 116. turbo T-6 80mm Forced inductions turbo starting at 10-12psi. using the 3 bar map sensor. Thks paul.
not sure how e85 is but with 93
12* 0-500rpm
ramped up to 24 degrees at 500-1300rpm
34 total from 2000+ rpm
then once in boost i pull it out fast at 10psi im down to about 16* but im trying to keep my stock stuff together.
12* 0-500rpm
ramped up to 24 degrees at 500-1300rpm
34 total from 2000+ rpm
then once in boost i pull it out fast at 10psi im down to about 16* but im trying to keep my stock stuff together.
