Gauge install
#1
TECH Enthusiast
Thread Starter
Join Date: Mar 2010
Location: Utah
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Gauge install
I've re-read the Gauge/Vacuum install sticky a few times. But just wondering if anyone would post up some pics or let me know how you ran your lines through the firewall. Any tips or suggestions welcome.
Thanks.
Thanks.
#2
9 Second Club
iTrader: (10)
Join Date: Apr 2009
Location: Joliet,IL and Las Vegas 50/50
Posts: 1,230
Likes: 0
Received 3 Likes
on
3 Posts
I drilled a hole behind and above where the brake pedal is. There is also a gromit on the passenger side behind the PCM where you could pass wire through if you don't want to drill. Use grommit if you do drill. I decided not to run trough the passenger grommet because wasnt sure if I'd have enough length fom my sending units.
#3
TECH Enthusiast
Thread Starter
Join Date: Mar 2010
Location: Utah
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
I drilled a hole behind and above where the brake pedal is. There is also a gromit on the passenger side behind the PCM where you could pass wire through if you don't want to drill. Use grommit if you do drill. I decided not to run trough the passenger grommet because wasnt sure if I'd have enough length fom my sending units.
#5
TECH Enthusiast
Thread Starter
Join Date: Mar 2010
Location: Utah
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts