can i use this cam
can i use this cam ok looking at getting a cc 503 for my lt1 block that is 30 over.
i was wondering if it would be ok to use this with a carb set up with a bd-11 powerdyne supercharger running it at most 8 psi. i only want to make like 550 at the most to the ground. i would also have a set of heads sent off to be ported by llyod. can i use the cam??? thanks
i was wondering if it would be ok to use this with a carb set up with a bd-11 powerdyne supercharger running it at most 8 psi. i only want to make like 550 at the most to the ground. i would also have a set of heads sent off to be ported by llyod. can i use the cam??? thanks
I don't see a problem with using that cam. You'll have a hard time getting 550 rwhp though with 8 psi of boost, the heads are going to have to flow some great numbers. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
