When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sure would be nice, I know it isn't going to help near as much as say an aftermarket casting would, but it might be a small crutch over other castings if it is indeed true.
24lbs a lot on my 5.3 with a billet 76, have hit 30lbs when doing some testing though. Also running 24lbs on a 6.0 with a t6 gt88 with no coolant pushed. Use ls9 gaskets and arp head studs!
24lbs a lot on my 5.3 with a billet 76, have hit 30lbs when doing some testing though. Also running 24lbs on a 6.0 with a t6 gt88 with no coolant pushed. Use ls9 gaskets and arp head studs!
Since I started pushing 15psi I always pop the hood at the end of the track before I get on the return road to see if it has pushed any water/coolant and so far so good.