Im trying to figure out what injectors to run im switching over to e85,but im not sure what kinda I should run what are you guys with e85 running?

 

big ones.


How much power do you want to make? I'm running 160lbs and still have some room...

 

probably 700-800 is was thinking 160lbs but wasnt sure if they where to big

 

160's will pulse short enough to idle a stock engine on E85, they won't be too big. I've got some 160's on the way for my E85 switchover

 

Some have gotten by with hi-imp 80lb'ers on high base pressure at 700-800rwhp. If you have the cash, get the hi-imp 160's and dont look back. They perform great and will support big power on E85. I used a set of FIC2000's on a 427 and they idle great too, just cost a lot.

Personally I use low-imp Deplhi 95's and a Versafueler driver box. New injectors and used box for $440. Couldnt pass it up. Was running 650rw with a little room yet.

 

im planning for 550-600rwhp for now and picked up 120's so i should have a little room to grow. have the rest of the fuel system so i figured id try the e85......weldon 2035 -10 both ways and aeromotive pro series reg.