Turbo ltx guys= best head gasket
#1
TECH Enthusiast
Thread Starter
iTrader: (11)
Join Date: Apr 2012
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Turbo ltx guys= best head gasket
what you guys using?
I was seriously thinking about a fel pro 1074. I will 8.5:1 cr with my setup just with the -31cc pistons and 65cc heads. Thats without head gaskets.
I was seriously thinking about a fel pro 1074. I will 8.5:1 cr with my setup just with the -31cc pistons and 65cc heads. Thats without head gaskets.
#2
i dont know the best, so i will just share what i am using and my set-up.
I am running a really thin (.030 ish?, cant remember) COMETIC head gasket.
11.3:1 compression, 7 lbs of boost. ARP studs.
This is the third time i have re-used the same headgaskets 3 times now. never leaked or given me any issues..
I am running a really thin (.030 ish?, cant remember) COMETIC head gasket.
11.3:1 compression, 7 lbs of boost. ARP studs.
This is the third time i have re-used the same headgaskets 3 times now. never leaked or given me any issues..
#4
I am running E85. I am planning on doing water injection, and upping the boost to 12 lbs with the same compression.