LQ4 Turbo Build Thread
LQ4 Turbo Build Thread No more Questions It's Build Time!!!
Alright guys I'm starting my first build thread.... After many questions I have been piecing stuff together!
This build is a factory rebuild on a LQ4 with ARP rod bolts... Planning on a MAX of 15psi with meth injection!...
Going for over 650rwhp behind a 4l80e and 9in Rear...
Here are some pictures of what is going on...
Dirty Pistons!
Soda blasted pistons!
My buddy spraying off block after blasting!
On the stand!
Taping for paint!
Right now my block is at a shop for cam bearing install because Iv already messed up a set!
TurboSmart Hypergate wastegate
"Brute Speed" Forced Induction Camshaft(EPP Blower Cam)
Running Clevite Main and Rod Bearings with Durabond Cam Bearings!!!
Next on the list...
Will Update as Build Proceeds (College student here so be Patient)
Alright guys I'm starting my first build thread.... After many questions I have been piecing stuff together!
This build is a factory rebuild on a LQ4 with ARP rod bolts... Planning on a MAX of 15psi with meth injection!...
Going for over 650rwhp behind a 4l80e and 9in Rear...
Here are some pictures of what is going on...
Dirty Pistons!
Soda blasted pistons!
My buddy spraying off block after blasting!
On the stand!
Taping for paint!
Right now my block is at a shop for cam bearing install because Iv already messed up a set!
TurboSmart Hypergate wastegate
"Brute Speed" Forced Induction Camshaft(EPP Blower Cam)
Running Clevite Main and Rod Bearings with Durabond Cam Bearings!!!
Next on the list...
- Patriot Performance Gold Dual Valve Springs!
- Pushrods and Lifters
- Full Gasket set with LS9 Headgaskets
- GT45R eBay Turbo
- Hot Side Tubing
- Intercooler and Turbing
- Fuel System
- and Much More!!!!
Will Update as Build Proceeds (College student here so be Patient)
Last edited by RedMilleniumZ28; May 7, 2012 at 12:20 PM.
P.S. your TA doesnt run... lol!
P O S COLLEGE BUDGET!!! SAME HERE man. I'm losing my patients. Can't wait to see more pictures. Is the gt45 the $260 Turbo?
http://www.ebay.com/itm/HUGE-GT45-TU...sories&vxp=mtr
http://www.ebay.com/itm/HUGE-GT45-TU...sories&vxp=mtr
and yes College sucks....
Trending Topics
TECH Fanatic
Joined: Jul 2010
Posts: 1,678
Likes: 0
That's the same turbo I have. You don't need to balance it. My turbo has about 300 miles and its perfect. Some other people on here have it also with out any problems.
Denmah is using one on 21psi on a 4.8l with out problems.
Denmah is using one on 21psi on a 4.8l with out problems.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo lol well maybe it doesnt need it then lol...
Hahaha my t/a is getting there I need to make a build thread when I get everything in, gotta drop
My cradle out again if you wonna
Come help
and might wonna check the balance at least on tht turbo if you have your
Doubts...what meth kit u running again
My cradle out again if you wonna
Come help
and might wonna check the balance at least on tht turbo if you have yourDoubts...what meth kit u running again
Teching In
Joined: Aug 2010
Posts: 10
Likes: 0
From: Fort Walton Beach FL
Nice build.....
Doing a similar setup LQ9 408 twin turbo with 317 heads. Sound crazy but I'm going to try to make between 1000-1500 hp at around 24-26 psi. when I first I was going to use the gt45 Ebay turbo, but after reading Hot Rod Magazine I changed my mind. I going to use two CXRacing 76mm BB turbo priced around $600 each. If you get a chance look up Hot Rod Magazine project named "Big Bang Theory" and keep in mind that it's a 4.8. I started work on a shave truck intake and stream cross over tubes on the heads for #7 cylinder. Post some pics soon.
Doing a similar setup LQ9 408 twin turbo with 317 heads. Sound crazy but I'm going to try to make between 1000-1500 hp at around 24-26 psi. when I first I was going to use the gt45 Ebay turbo, but after reading Hot Rod Magazine I changed my mind. I going to use two CXRacing 76mm BB turbo priced around $600 each. If you get a chance look up Hot Rod Magazine project named "Big Bang Theory" and keep in mind that it's a 4.8. I started work on a shave truck intake and stream cross over tubes on the heads for #7 cylinder. Post some pics soon.
When u buy ur springs buy the "extreme" kit. It's got a higher seat pressure for boost and I believe just a couple dollars more. And I got a brand new eBay intercooler for sale if ur interested.
