Ford Alternator on a LS1 motor?
Thread Starter
FormerVendor
iTrader: (14)
Joined: Jun 2008
Posts: 1,765
Likes: 2
From: Homestead, FL
Ford Alternator on a LS1 motor? This is just a feeler thread.
We are looking at making a alternator bracket that will allow the use
of a ford alternator on a LS1 motor so the guys doing a LS1 swap in
a mustang can use their stock alternator.
This would make the alternator wiring plug and play.
We are looking at making a alternator bracket that will allow the use
of a ford alternator on a LS1 motor so the guys doing a LS1 swap in
a mustang can use their stock alternator.
This would make the alternator wiring plug and play.
Last edited by ModularTurbo; May 13, 2012 at 04:19 PM.
Thread Starter
FormerVendor
iTrader: (14)
Joined: Jun 2008
Posts: 1,765
Likes: 2
From: Homestead, FL
We have been doing some research and the 2G is like 65 amps.
All the guys with that alt upgrade to the 3G.
As far as wasting our time one will never know until they try.
imo there is a market for it, small yes but you would have it cornered imo. just do it for the diff acc drives like f-body or truck, etc. either that or offer a connector for the gm alt with the resistor built into it already so a 12v source is hooked up and its done
