on3 44mm waste gate
Be sure to check valve and guide for any debris. My 60mm gate stuck open and would not build any boost . Cleaned the guide with my
drimmel with sand paper wheel. And did the valve with emery cloth. Works good as new now
drimmel with sand paper wheel. And did the valve with emery cloth. Works good as new now
its funny alot of people say to take them apart and inspect them, Ive never had an issue with one, i only take them apart to swap the springs
I may try to use an on3, if i get an on3 turbo. But my stubborn side wont let me use an on3 on my tc78 :/
I have to use a evolution 38mm for mine. Or else it will always be eating away at me.
I have to use a evolution 38mm for mine. Or else it will always be eating away at me.
