06 Ford GT : Project Silver Bullet
Thread Starter
Teching In
Joined: Sep 2011
Posts: 10
Likes: 0
BILLET!!
Finally got the billet brackets in, which look amazing! I’m glad were past this stage now and moving forward now the up pipes, exhaust and dumps can all be welded. I still haven’t decided what I plan to do beyond this point….if I should do a water to air setup or not…it’s a really hard choice, but I know I have to make up my mind soon as things progress.
Finally got the billet brackets in, which look amazing! I’m glad were past this stage now and moving forward now the up pipes, exhaust and dumps can all be welded. I still haven’t decided what I plan to do beyond this point….if I should do a water to air setup or not…it’s a really hard choice, but I know I have to make up my mind soon as things progress.
Thread Starter
Teching In
Joined: Sep 2011
Posts: 10
Likes: 0
Missing Updates?
Well I got something! The car has sort of been pushed to the side with me as I have been super busy with business and other things in life, but I think it's time I get back into it and start making the push. Centerline has been good to me and have been keeping my car safe on the hoist while I have been doing my thing. I'm glad that this hasn’t been an issue for them as they really do good work and I wouldn't want to take my car anywhere else.
Pipes are a bit off as the tape came apart and since it was about to come off to be tacked together, but I’m sure you guys get the point here! Clearance is a huge issue and thats why the pie cuts had to be used!
Well I got something! The car has sort of been pushed to the side with me as I have been super busy with business and other things in life, but I think it's time I get back into it and start making the push. Centerline has been good to me and have been keeping my car safe on the hoist while I have been doing my thing. I'm glad that this hasn’t been an issue for them as they really do good work and I wouldn't want to take my car anywhere else.
Pipes are a bit off as the tape came apart and since it was about to come off to be tacked together, but I’m sure you guys get the point here! Clearance is a huge issue and thats why the pie cuts had to be used!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
