Turbo Technology Turbo Kit?
Thread Starter
Joined: Oct 2011
Posts: 696
Likes: 5
From: Salt Lake City, UT
Turbo Technology Turbo Kit? Hey LS1tech!
I've been recently looking into the Turbo Technology Inc turbo kit (62-1).
Has anyone used them or purchased from them? I tried doing a search but didn't see too much on the kits that they have.
My car is basically stock as far as internals go.
Thanks!
I've been recently looking into the Turbo Technology Inc turbo kit (62-1).
Has anyone used them or purchased from them? I tried doing a search but didn't see too much on the kits that they have.
My car is basically stock as far as internals go.
Thanks!
I'm not sure which kit that is, but if it's the old street kit with either a 60 or 76mm turbo it's a nice kit but only capable of 500rwhp due to the design. They have a single turbo race kit that can take you to 1000rwhp+ and they also have a new twin turbo street kit capable of 1000rwhp+
Thread Starter
Joined: Oct 2011
Posts: 696
Likes: 5
From: Salt Lake City, UT
Thanks for the reply Mike, my goal is to get around 500rwhp/600rwhp currently
Here is a link to their site, I'm pretty sure they are a sponsor on here, but may be wrong...
http://www.turbotechnologyinc.com/site/?page_id=113
I was most likely going to get their lower end kit, it seems to be one of the most complete + you can keep your A/C and all that :3
Here is a link to their site, I'm pretty sure they are a sponsor on here, but may be wrong...
http://www.turbotechnologyinc.com/site/?page_id=113
I was most likely going to get their lower end kit, it seems to be one of the most complete + you can keep your A/C and all that :3
Thread Starter
Joined: Oct 2011
Posts: 696
Likes: 5
From: Salt Lake City, UT
Sweet, let me know if you find anything 02sleeperz28! 
For someone like me with a pretty stock motor I think this looks like a great kit. I like how they lay everything out with a lot of different options.
For someone like me with a pretty stock motor I think this looks like a great kit. I like how they lay everything out with a lot of different options.
Might Mouse ran one of those systems with a GT91 into the mid 8's, Ryan K has one on his camaro with a 82mm turbo and runs 9.1's I have a very similiar system except the turbo is turned at a angle to allow a larger turbo.
George is a very knowledgable guy and who I ordered my turbos thru. I was at his shop last week and there is a reason Granetelli sent their camaro to him to put the twin turbos on it. 
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
George builds some of the nicest kits there are. I am not just saying that because he supports heads up drag racing like he does but it is true, his stuff is the nicest "Kit" I have ever seen. I like to save money as much as anyone out there but you will be money ahead with one of his kits as the fitment is absolutely amazing. I took a tour of his shop and looked at one of his kits on a new challenger as it was being installed and its simply mind blowing.
" Requires Turbo, Wastegate, BOV, Oil Lines, Pusher Fans, Misc Hardware, and Truck Manifolds to complete
Kit requires removal of the A/C, Low Oil Sensor, and lowering or removal of front sway bar"
the tti street kit comes with everything and requires none of that.
JUST SAYIN
not exactly apples to apples.. see this part?
" Requires Turbo, Wastegate, BOV, Oil Lines, Pusher Fans, Misc Hardware, and Truck Manifolds to complete
Kit requires removal of the A/C, Low Oil Sensor, and lowering or removal of front sway bar"
the tti street kit comes with everything and requires none of that.
JUST SAYIN
" Requires Turbo, Wastegate, BOV, Oil Lines, Pusher Fans, Misc Hardware, and Truck Manifolds to complete
Kit requires removal of the A/C, Low Oil Sensor, and lowering or removal of front sway bar"
the tti street kit comes with everything and requires none of that.
JUST SAYIN
Thread Starter
Joined: Oct 2011
Posts: 696
Likes: 5
From: Salt Lake City, UT
Yeah, and I want to keep my A/C, which the current Huron kit would not allow me to do..
Now, I did read that Huron is going to producing a kit that allows you to keep the A/C, BUT there is no price available for this kit yet (or a release date), which is why I was looking at the TTI kit just in case their A/C kit didn't quite work out for me
Now, I did read that Huron is going to producing a kit that allows you to keep the A/C, BUT there is no price available for this kit yet (or a release date), which is why I was looking at the TTI kit just in case their A/C kit didn't quite work out for me
Staging Lane
Joined: Oct 2008
Posts: 59
Likes: 0
From: alaska/washington/california
I have mine for sale because we went with a bigger cube motor and twins I loved it but the motor was tired even befor we put it on call george he has mine there its only got around 2500 miles on it one thing you have to watch is dont put too much boost or heads will lift (antifreeze everywhere)lol
1000rwhp, granetelli, huron, intercooler, kit, ls1, ls1tech, lt1, reveiw, ryan, speed, technologies, technology, trans, tti, turbo, twin
