Forced Induction Superchargers | Turbochargers | Intercoolers

'99 5.3 whp estimate?

Thread Tools
 
Search this Thread
 
Old Apr 9, 2013 | 01:00 PM
  #1  
nastylx's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2013
Posts: 152
Likes: 0
Default '99 5.3 whp estimate?

99 5.3
Aftermarket: piston rings, rod bolts, rotating assembly bearings
Comp blower cam
Main girdle
oil pump
706's: ported
Dual springs
rr's
valve girdle
Edelbrock pro flo intake:ported
fasst fuel rails
60 or 80# injectors
bg s480 on 20#
th400 rmvb 3600 stall & a brake
carbon driveshaft
8.8 rear with 3.55's, locker, and 31 spline mosier's
275 drag radials

these are my plans im just wondering wat it will be

Last edited by nastylx; Apr 10, 2013 at 11:46 AM.
Reply
Old Apr 9, 2013 | 01:21 PM
  #2  
Twin turbo c5's Avatar
TECH Enthusiast
 
Joined: Oct 2012
Posts: 581
Likes: 0
From: Arkansas
Default

It'll make some power . It'll make probably 600 rwhp or better on high boost.That's about the same combo I have in my Fairmont.
Reply
Old Apr 9, 2013 | 01:23 PM
  #3  
redtan's Avatar
TECH Junkie
iTrader: (5)
 
Joined: May 2008
Posts: 3,764
Likes: 17
From: Belmont, MA
Default

You got LS3 heads on a 3.780 bore?
Reply
Old Apr 9, 2013 | 01:26 PM
  #4  
LT1RAY's Avatar
TECH Enthusiast
iTrader: (21)
 
Joined: Jan 2011
Posts: 541
Likes: 1
From: Colorado Springs, CO
Default

You can't use ls3 heads on a 5.3 unless they are the aftermarket small bore ls3 heads.
Reply
Old Apr 9, 2013 | 01:41 PM
  #5  
redtan's Avatar
TECH Junkie
iTrader: (5)
 
Joined: May 2008
Posts: 3,764
Likes: 17
From: Belmont, MA
Default

You can't use ls3 heads on a 5.3 unless they are the aftermarket small bore ls3 heads.
Even so, I thought that those still require a 4.000 bore minimum.
Reply
Old Apr 9, 2013 | 02:28 PM
  #6  
nastylx's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2013
Posts: 152
Likes: 0
Default

Well what heads and oil pump should i go with?
Reply
Old Apr 9, 2013 | 02:31 PM
  #7  
nastylx's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2013
Posts: 152
Likes: 0
Default

Im new to ls so i need some serious info
Reply
Old Apr 9, 2013 | 03:24 PM
  #8  
9sectruck's Avatar
TECH Fanatic
iTrader: (9)
 
Joined: Dec 2008
Posts: 1,173
Likes: 2
From: jefferson city MO
Default

YOU can not use ls3 heads on any thing smaller then 6.0.
what fuel? boost level?
If you are pump gas 317 heads, e85 or something to that octane 241,706,243,
stock oil pump with a heavy spring.
mine just put down 621 on a mustang dyno at 19psi
Reply
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-1

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-2

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-3

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-4

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-5

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-6

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo
story-7

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

 Verdad Gallardo
story-8

10 Camaros You Should Never Buy

 
story-9

10 LS Engine Myths That Refuse to Die

 Verdad Gallardo
Old Apr 9, 2013 | 03:35 PM
  #9  
nastylx's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2013
Posts: 152
Likes: 0
Default

What is best heads to run with 5.3 on 20psi and meth
Reply
Old Apr 9, 2013 | 03:57 PM
  #10  
ls6-240sx's Avatar
Teching In
 
Joined: Jun 2009
Posts: 21
Likes: 0
From: Adrian, MI
Default

I have 243's on my 5.3
Reply
Old Apr 9, 2013 | 05:33 PM
  #11  
LT1RAY's Avatar
TECH Enthusiast
iTrader: (21)
 
Joined: Jan 2011
Posts: 541
Likes: 1
From: Colorado Springs, CO
Default

Originally Posted by redtan
Even so, I thought that those still require a 4.000 bore minimum.
No they don't.

http://www.mastmotorsports.com/2010/...sembled&id=360
Reply
Old Apr 9, 2013 | 07:24 PM
  #12  
redtan's Avatar
TECH Junkie
iTrader: (5)
 
Joined: May 2008
Posts: 3,764
Likes: 17
From: Belmont, MA
Default

Damn those are sick, all the benefits of the large rectangular ports and better intake with a 2.080 valve that works on smaller bores with small chambers.

Still wouldn't work on his bore though.
Reply
Old Apr 9, 2013 | 08:17 PM
  #13  
HarshReality's Avatar
Staging Lane
 
Joined: Mar 2013
Posts: 85
Likes: 0
Default

706's heads with a valve job and back cut the valves. And boost it and keep it moving.


HR
Reply
Old Apr 10, 2013 | 10:19 AM
  #14  
98CamZ28's Avatar
10 Second Club
20 Year Member
Photogenic
Photoriffic
Liked
iTrader: (31)
 
Joined: Nov 2004
Posts: 550
Likes: 15
From: NW IN
Default

I recently made 550rwhp on 11.5 lbs using a BW S480 on a 5.3 with less stuff than you have. On 20 lbs, i'd imagine you might see 700-750 at the tire
Reply
Old Apr 10, 2013 | 11:44 AM
  #15  
nastylx's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2013
Posts: 152
Likes: 0
Default

Good to hear^
Reply
Old Apr 10, 2013 | 11:47 AM
  #16  
chiaj144's Avatar
Banned
iTrader: (4)
 
Joined: Dec 2009
Posts: 483
Likes: 1
From: Usa
Default

I made 587rwhp at 12.5psi with a little mpt 70. Cam and valve spring L33. Went 133mph at 9psi.
Reply
Old Apr 10, 2013 | 11:48 AM
  #17  
nastylx's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2013
Posts: 152
Likes: 0
Default

My goal is 700rwhp, so to hear that gives me some inspiration
Reply
Old Apr 10, 2013 | 11:49 AM
  #18  
nastylx's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2013
Posts: 152
Likes: 0
Default

An it will be in 89 notch
Reply
Old Apr 10, 2013 | 11:51 AM
  #19  
nastylx's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2013
Posts: 152
Likes: 0
Default

I know hotrodtv did similar build and made 540rwhp on only 8psi, so im hoping with a few more mods and 20# i'll see 700 wen its all said an done
Reply
Old Apr 10, 2013 | 12:26 PM
  #20  
nastylx's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2013
Posts: 152
Likes: 0
Default

Should i get 120# injectors?
Reply



All times are GMT -5. The time now is 06:21 PM.

story-0
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-1
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-2
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-3
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-4
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-5
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-6
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE
story-7
Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Slideshow: A heavily reworked 1972 K5 Blazer swaps its off-road roots for a low-slung street-focused build with modern V8 power.

By Verdad Gallardo | 2026-03-09 18:08:45


VIEW MORE
story-8
10 Camaros You Should Never Buy

Slideshow: There are thousands of used Camaros on the market but we think you should avoid these 10

By | 2026-02-17 17:09:30


VIEW MORE
story-9
10 LS Engine Myths That Refuse to Die

Slideshows: Which one of these myths do you believe?

By Verdad Gallardo | 2026-01-28 18:10:11


VIEW MORE