Needed parts to complete Procharger setup?
Thread Starter
Staging Lane
Joined: Apr 2012
Posts: 94
Likes: 0
Needed parts to complete Procharger setup? I found an F1 procharger headunit for $300. What else do I need for the to make a complete procharger setup? Given that the unit works fine and will more than likely put new bearins in it. I have an '01 SS Canaro with an MS3 can, 806 heads(I know I know), LS6 intake, 85mm BK TB, SLP Flowpack CAI, full exhaust, 4L60E, PT4000, 3.73's... Not everything is listed in this post but it is on my profile page if you need more info.
Thread Starter
Staging Lane
Joined: Apr 2012
Posts: 94
Likes: 0
I know I will need piping of course. How much boost can I run before needing an intercooler? I want to make upwards of 600whp if possible without buying more upgrades. Better heads will come later along with FAST intake and tb
Make sure the head unit spins the right direction for the F-body (reverse)
Intercooler with plumbing kit
J-bracket
Crank pulley
Crank pin kit
Procharger fan shroud
Air fliter for head unit
Blower hat for filter
60+ # injectors
dual intank fuel pumps
I would give Bob at brute speed a call and talk to him about getting you set up with what you need to get it all together.
Intercooler with plumbing kit
J-bracket
Crank pulley
Crank pin kit
Procharger fan shroud
Air fliter for head unit
Blower hat for filter
60+ # injectors
dual intank fuel pumps
I would give Bob at brute speed a call and talk to him about getting you set up with what you need to get it all together.
Last edited by conan; Aug 19, 2013 at 09:29 AM.
Make sure the head unit spins the right direction for the F-body (reverse)
Intercooler with plumbing kit
J-bracket
Crank pulley
Crank pin kit
Procharger fan shroud
Air fliter for head unit
Blower hat for filter
60+ # injectors
dual intank fuel pumps
I would Bob at brute speed a call and talk to him about getting you set up with what you need to get it all together.
Intercooler with plumbing kit
J-bracket
Crank pulley
Crank pin kit
Procharger fan shroud
Air fliter for head unit
Blower hat for filter
60+ # injectors
dual intank fuel pumps
I would Bob at brute speed a call and talk to him about getting you set up with what you need to get it all together.
Make sure the head unit spins the right direction for the F-body (reverse)
Intercooler with plumbing kit
J-bracket
Crank pulley
Crank pin kit
Procharger fan shroud
Air fliter for head unit
Blower hat for filter
60+ # injectors
dual intank fuel pumps
I would Bob at brute speed a call and talk to him about getting you set up with what you need to get it all together.
Intercooler with plumbing kit
J-bracket
Crank pulley
Crank pin kit
Procharger fan shroud
Air fliter for head unit
Blower hat for filter
60+ # injectors
dual intank fuel pumps
I would Bob at brute speed a call and talk to him about getting you set up with what you need to get it all together.
Thanks, I appreciate it! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
Thread Starter
Staging Lane
Joined: Apr 2012
Posts: 94
Likes: 0
Haha alright cool!! Ill be sure to give you a call when I get off work today around 4. Will I need a different size stall? Also, would you mind(Bob) putting up a few prices or these items I would need? Or an estimate for the kit? Thanks for the input guys
You'll need a triple disc converter in order to handle the power. Send me an e-mail to brutespeed@gmail requesting a parts list. Thanks. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
