buying valve train stuff
buying valve train stuff quick overview guys:
LQ4
317's
228R 114LSA .590/.590 cam
twin T61's
Parts list:
ARP head studs
lunati .660 dual springs
LS9 head gasket
what size push rods should i run? how do you figure the length out for that matter? since Im going to be in there if i figure why not swap the lifters.. any affordable recommendations?
LQ4
317's
228R 114LSA .590/.590 cam
twin T61's
Parts list:
ARP head studs
lunati .660 dual springs
LS9 head gasket
what size push rods should i run? how do you figure the length out for that matter? since Im going to be in there if i figure why not swap the lifters.. any affordable recommendations?
Last edited by oscs; Oct 29, 2013 at 09:35 PM.
You should measure with the pushrod checker tool, but I used the standard 7.4" COMP Cams (7638-16) with LS9 gaskets and they were fine. Stock LS7 lifters are standard and can be bought anywhere.
