Vortech owners check this lid out!
Originally Posted by Unaffiliated Racing
the same as it was last time...three weeks total..so still about two weeks out
Thanks Brian, you are the man!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
vortec air box lid
Originally Posted by Unaffiliated Racing
There are still a few people comming on board. I need to recieve payment before monday morning, after that there are no guarentees that I can get more lids done in this batch. If all goes well hopefully I will be needing to have another batch made. As stated in earlier posts in this thread, payment can be made VIA paypal. $165 to:
urtracing@yahoo.com
urtracing@yahoo.com
thank you
John Giambertone
i dont know if your design is set in stone, but i think you would have more gains by tapering the kneck of the lid.. start out as wide as posible from the lid, then smoothly transition it to the size of the MAF meter.
did they make the mold already?
if you have a CAD file of this i can do some work on improving it.
what type of mold is being used? injection mold or vacuum formed?
did they make the mold already?
if you have a CAD file of this i can do some work on improving it.
what type of mold is being used? injection mold or vacuum formed?
The mold has been set since about 1 year ago and the first batch ( other than the prototype) was picked up yesterday and will ship this week. If I can get enough orders for another batch I will produce more. The cost will go up if I do another batch, I didnt make a dime on this first batch because there was no demand..now there is becomming a demand. If you have any questions please drop me an e-mail.
bbrannen@compcams.com
Thanks,
Brian
bbrannen@compcams.com
Thanks,
Brian
where can i get one
Originally Posted by Inspector12
Here are afew picture of a lid for the vortech kits. The guy needs at least 5 guys to make a run of these to keep the cost down I am looking for other interested in one so we can get these lids out there to the few of us running vortec kits and wanting to get a little more out of it. He is emailing me some dyno runs of it on a stock car. It made 18Hp and !8TQ increase with just the lid and on a stock car with the vortech aftercooler on it. Pm me if you are interested and I will set it up where we can get these made.
I need everyboday that has already purchased a lid to e-mail me a phone number. It is require for shipping purposes. All those who have come on board late and are interested in purchasing a lid please e-mail me also and let me know that...along with all of your contact information.
bbrannen@compcams.com
Thanks,
Brian
bbrannen@compcams.com
Thanks,
Brian
They should go out tomorrow...I was waiting for everybody's phone numbers, but I haven't gotten all of them yet. Another guy is shipping them for me, his wife works for Fedex. I told them to go ahead and ship all that I had numbers for and would send the last two when I recieved the phone numbers