My 80/20 meth/water experiment

Reply Subscribe

Thread Tools

Search this Thread

Jan 28, 2014 | 08:55 PM

TurboAv

Thread Starter

TECH Fanatic

iTrader: (6)

Joined: Oct 2005

Posts: 1,455

Likes: 1

From: Tonopah, AZ

My 80/20 meth/water experiment

I tried running 20% distilled water in with my meth today. AFR went from 10.4 to 10.8-11.0 and I picked up a bit of KR around peak torque and around 6000-6300. All 1* or less of KR. Adjusted the PE table to get AFR back to 10.3-10.4 and it's still showing KR at peak torque and I even dropped the timing a little. Took her from 10* at peak torque and 12* up top to 8* at peak torque and 10* up top. I will be sticking with 100% meth from now on. This is all on a single 15gph Alky Control kit with the controller maxed out. My second 10gph nozzle will be here soon. I'll dial the controller back and readjust the tune then.

Jan 28, 2014 | 09:01 PM

Twin turbo c5

TECH Enthusiast

Joined: Oct 2012

Posts: 581

Likes: 0

From: Arkansas

I've tried all kinds of different combo's with meth. I always use alky control setups too and I always go back to 100% meth nothing ever drops my IAT's down better than 100%..

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last