Whats needed after the Denmah Kit?
Whats needed after the Denmah Kit? We're getting ready to tackle a 5.3 turbo. I plan on buying the denmah kit from vsracing. Gonna upgrade and get the fuel pump, and injectors. Gonna be running an ls6 intake, ls6 valve springs, ls6 camshaft, and brian tooley pushrods. Anything else i should upgrade? What else will i need besides the kit? This will go in a 2000 hoss camaro. Thanks guys.
You'll need a hotside, fuel pressure regulator and a fuel return line. Depending on how much power you want to make you'll likely want 2 pumps in your tank not just 1. And add $500 on top for little nickel and dime stuff.
What fuel will you be running?
exhaust tubing, flex pipe? if you want it
some Vbands to take the hotside apart are also nice but not totally needed
a single walbro 400 lph goes in nearly every stock fuel tank i have seen and will do 650+ thru an auto so far with my testing great pump for 100 dollars drops in uses stock lines and wires etc
some Vbands to take the hotside apart are also nice but not totally needed
a single walbro 400 lph goes in nearly every stock fuel tank i have seen and will do 650+ thru an auto so far with my testing great pump for 100 dollars drops in uses stock lines and wires etc
