m112 from vette to f-body
My kit ( just sold it) was an MP112 modified specifically for Fbody. It's base was the M112 from a vette. If you pm me I will give you the name of the company who built. They are no longer a sponsor so I'm not comfortable giving the info on the boards. I'm sure they can tell you what needs to be modified. In my opinion, it seems only the throttle body intake snout as well as pully shim spacers.
- need to space your k member
- need to trim the cowl a little to accommodate the front of the blower
- need to trim the space between wipers.
If you look a few threads down you will see someone who claims they put a 2300 TVS in an Fbody. Either way take a look, you will see the trimming that I'm speaking about at the rear of the blower.
- need to space your k member
- need to trim the cowl a little to accommodate the front of the blower
- need to trim the space between wipers.
If you look a few threads down you will see someone who claims they put a 2300 TVS in an Fbody. Either way take a look, you will see the trimming that I'm speaking about at the rear of the blower.
There is a direct bolt on kit for the Fbody but the power is minimal.
http://www.hawksthirdgenparts.com/pr...arger-Kit.html
http://www.hawksthirdgenparts.com/pr...arger-Kit.html
