Forced Induction Superchargers | Turbochargers | Intercoolers

finally got to the track

Thread Tools
 
Search this Thread
 
Old 09-02-2014, 09:46 PM
  #1  
Teching In
Thread Starter
 
AaronPrebe's Avatar
 
Join Date: Jun 2014
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default finally got to the track

So it has been awhile in the making but I have made it to the track. Me and a couple of buddies went to the muscle car shootout at brainerd MN. The two days of rain sucked and i only got one pass per day. First pass was an 10.80 with a 1.9 60 ft second pass i used the brake and it went 10.33 at 132 with a 1.6 sixty ft and the last pass I got was a 10.03 at 131 with a 1.41 660 ft. The last pass i turned up launch rpm to 4000. It is a 1980 Monte Carlo with a very stock 6.0, s480 turbo This was all done with 10psi of boost
Attached Thumbnails finally got to the track-image.jpg  

Last edited by AaronPrebe; 09-02-2014 at 09:54 PM.
Old 09-02-2014, 09:56 PM
  #2  
On The Tree
 
LosLS2's Avatar
 
Join Date: Aug 2014
Location: West Palm Beach, FL
Posts: 179
Likes: 0
Received 1 Like on 1 Post
Default

grats!
Old 09-02-2014, 10:32 PM
  #3  
On The Tree
iTrader: (1)
 
360demonRT's Avatar
 
Join Date: Jul 2006
Posts: 188
Likes: 0
Received 0 Likes on 0 Posts

Default

Nice runs, how much boost were you leaving with? Trans/converter combo? Love me some lsx Gbody lol
Old 09-02-2014, 10:48 PM
  #4  
Teching In
Thread Starter
 
AaronPrebe's Avatar
 
Join Date: Jun 2014
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

its a th400 and a coan converter was trying to leave on 10psi had the two step at 4000 and it was there but not for sure if i was at full boost.
Old 09-03-2014, 12:38 AM
  #5  
8 Second Club
iTrader: (3)
 
RonSSNova's Avatar
 
Join Date: Aug 2011
Location: Portland, OR
Posts: 4,596
Received 698 Likes on 439 Posts

Default

Nice job! Congrats.

Ron
Old 09-03-2014, 06:11 AM
  #6  
9 Second Club
iTrader: (2)
 
yenkomike's Avatar
 
Join Date: Aug 2013
Location: oxford mi
Posts: 1,415
Likes: 0
Received 181 Likes on 96 Posts

Default

good running car.
Old 09-03-2014, 08:37 AM
  #7  
TECH Fanatic
iTrader: (2)
 
jleews6's Avatar
 
Join Date: Jan 2002
Location: roanoke virginia
Posts: 1,392
Received 1 Like on 1 Post

Default

Almost in the nines first time out. Pretty impressive! What cam is in it? 130 on 10 pounds shows some good power.
Old 09-03-2014, 08:01 PM
  #8  
Teching In
Thread Starter
 
AaronPrebe's Avatar
 
Join Date: Jun 2014
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

This is a absolutely stock motor no cam I pulled the oil pan off to put a new one on and i pulled the valve covers to weld bungs in for the breather tank, installed a single plane intake a csu carb and 6010 box. So yes I am quite happy at this point cant wait to turn it up a bit
Attached Thumbnails finally got to the track-image.jpg  
Old 09-03-2014, 08:06 PM
  #9  
On The Tree
iTrader: (1)
 
wolfinsheepsclothing's Avatar
 
Join Date: Aug 2014
Posts: 125
Likes: 0
Received 0 Likes on 0 Posts
Default

Congrats! Beautiful car.
Old 09-03-2014, 08:39 PM
  #10  
Teching In
Thread Starter
 
AaronPrebe's Avatar
 
Join Date: Jun 2014
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks guys its been a lot of work but it all pays off when you hit the gas and hear the whistle. I have an 02 in it now and have been working on the carb its getting closer.
Old 09-03-2014, 11:38 PM
  #11  
TECH Apprentice
iTrader: (1)
 
dezlfrek's Avatar
 
Join Date: Oct 2013
Location: sonoma ca
Posts: 309
Likes: 0
Received 0 Likes on 0 Posts
Default

bad ***.. yes kevin will help you get that carb dialed in.. and that's pretty cool on a stock cam and 10psi.. good work..
Old 09-04-2014, 11:17 AM
  #12  
8 sec potential, 12 sec slip
iTrader: (50)
 
ChevyChad's Avatar
 
Join Date: Apr 2002
Location: Savannah, GA
Posts: 4,093
Likes: 0
Received 2 Likes on 2 Posts

Default

Very nice numbers! Especially from a stock block



Quick Reply: finally got to the track



All times are GMT -5. The time now is 06:25 PM.