pick apart my build

Reply Subscribe

Thread Tools

Search this Thread

Feb 3, 2015 | 01:22 AM

cr250r

Thread Starter

On The Tree

iTrader: (4)

Joined: Dec 2012

Posts: 114

Likes: 0

From: FT. RILEY KS

pick apart my build

Right now i have a short block i just had machined i will assemble lh6 block callies rods wiseco pistons doing tea cnc ported 241's tick custom cam pro flow xt intake and 80 or 95lb injectors ordering harness soon from psi what do i need for sd tune? Looking for 10 seconds in 70 C10 long bed 17-19 lbs of boost meth or e85 street strip truck 4l80e

Feb 3, 2015 | 01:31 AM

cr250r

Thread Starter

On The Tree

iTrader: (4)

Joined: Dec 2012

Posts: 114

Likes: 0

From: FT. RILEY KS

S360 turbos .88 a/r 3600 stall

Feb 3, 2015 | 03:33 AM

RonSSNova

8 Second Club

iTrader: (3)

Joined: Aug 2011

Posts: 4,729

Likes: 814

From: Portland, OR

Fot E85 you will want the 95 lb injectors I think.

Feb 3, 2015 | 08:43 AM

cr250r

Thread Starter

On The Tree

iTrader: (4)

Joined: Dec 2012

Posts: 114

Likes: 0

From: FT. RILEY KS

Thats what i was thinking has anybody had a good fuel set up you can drive with e85 an not burn up the pump or or over heat the fuel?

Feb 3, 2015 | 04:48 PM

RonSSNova

8 Second Club

iTrader: (3)

Joined: Aug 2011

Posts: 4,729

Likes: 814

From: Portland, OR

Maybe head over to Yellow Bullet and ask about fuel systems.

I chose the holley 1800 and regulator with no issues. But others have had problems.

You aren't going to find many folks who measure fuel temp rise.

Forcefed86 on here can give you some good advice.

Ron