Custom turbo setup
Thread Starter
Teching In
Joined: Feb 2015
Posts: 26
Likes: 0
From: South carolina
Custom turbo setup I have 99 camaro that I've been back and forth on swapping, it's a v6, but after looking into it, id like to try and boost it. It seems like the way to go in today's world. No one makes headers for the v6 so how would I go about making my own? I only want to run a single turbo set up.
Trending Topics
It's possible but will be more involved than a rear mount.
Intercoolers are universal. You have to figure out yourself how you want to route the pipes. Too many variables. Too many options.
But a basic fmic kit like hurons is a starting point
Intercoolers are universal. You have to figure out yourself how you want to route the pipes. Too many variables. Too many options.
But a basic fmic kit like hurons is a starting point
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Thread Starter
Teching In
Joined: Feb 2015
Posts: 26
Likes: 0
From: South carolina
i wonder if i bought some cheap lsx turbo headers off of ebay, could i cut the flanges off and weld new 3.8 manifold flanges on, and modify the headers if necessary? it would be used for mock up just to get a baseline design, but could that be possible?