.
Selling My heads!
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Selling My heads! just an FYI for someone needing a nice set of FI heads. Mine are avalable. 6.0 lq4's comp dual 921 srings. flow 300cfm and are just redone by esp. origalanly from gtp
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
That price isnt in stone, thats what id like to get, but you dont always get what you want. unfortunatly. You think thats alot, imagine over 2k to buy them once, then almost 2 k to do them over, then 800 for 921 springs!! then get rid of them a month later! DOH.
to be honist with you guys, i dont even know what TTT means, i just see everyone do it if they get no responce. so fill me in on that to.
to be honist with you guys, i dont even know what TTT means, i just see everyone do it if they get no responce. so fill me in on that to.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
i will have to find out about the valves.
They have been milled, But it was very minimal just to reserface and clean it.
The heads where origanly done by GTP so that is the bulk of machine work, and ESP cleaned them up, did a valve job and reasembled.
they where flowed at 300 cfm @ 600
like i said they only have maybe 300 miles on them
They have been milled, But it was very minimal just to reserface and clean it.
The heads where origanly done by GTP so that is the bulk of machine work, and ESP cleaned them up, did a valve job and reasembled.
they where flowed at 300 cfm @ 600
like i said they only have maybe 300 miles on them
Originally Posted by Noyzee
i will have to find out about the valves.
They have been milled, But it was very minimal just to reserface and clean it.
The heads where origanly done by GTP so that is the bulk of machine work, and ESP cleaned them up, did a valve job and reasembled.
they where flowed at 300 cfm @ 600
like i said they only have maybe 300 miles on them
They have been milled, But it was very minimal just to reserface and clean it.
The heads where origanly done by GTP so that is the bulk of machine work, and ESP cleaned them up, did a valve job and reasembled.
they where flowed at 300 cfm @ 600
like i said they only have maybe 300 miles on them