Getting 580+ WHP with LS2 and Vortech V3 SI?
Thread Starter
Teching In
Joined: Sep 2013
Posts: 29
Likes: 0
From: Pasadena, CA
Getting 580+ WHP with LS2 and Vortech V3 SI? Hey guys,
I have a 2007 Corvette C6 M6 with LS2 currently sitting around 460 whp with the following mods:
I'm toying with the idea of tossing on an A&A Supercharger kit with the goal of hitting 580+ WHP. I've been told that the current CAM is not recommend, but it will still work and make big HP under boost. Do you guys think a 130 WHP increase from the A&A V3 SI kit is feasible and safe with my current setup? Any input or thoughts are appreciated.
I have a 2007 Corvette C6 M6 with LS2 currently sitting around 460 whp with the following mods:
- G5X3 CAM w 114 LSA
- B&B Headers
- Ported FAST 102
I'm toying with the idea of tossing on an A&A Supercharger kit with the goal of hitting 580+ WHP. I've been told that the current CAM is not recommend, but it will still work and make big HP under boost. Do you guys think a 130 WHP increase from the A&A V3 SI kit is feasible and safe with my current setup? Any input or thoughts are appreciated.
On The Tree
Joined: Jul 2009
Posts: 182
Likes: 0
From: Houston
That cam will make good power, no need to change it. You'll make 600+whp depending on whether you run the 3.6-3.8 pulley.
My old LS3 with an SI trim and BB mufflers. Stock cam, heads, exhaust manifolds.
My old LS3 with an SI trim and BB mufflers. Stock cam, heads, exhaust manifolds.
