Another 5.3 mustang build
Thread Starter
Teching In
Joined: Jun 2012
Posts: 35
Likes: 0
Another 5.3 mustang build Getting ready to do a 5.3 turbo ls build the following is the run down of what I have so far..
Holley HP efi
Holley 120# injectore
E98 fuel
Holley 12-1800 plus boost a pump
two 10an feeds to pump / 8an to the stock rails / 6an return
CX racing Air to Water Intercooler
VS racing BOV and Wastegates
LS 9 head gaskets
Gen 3 5.3 truck engine 200K miles
BTR 650 lift springs
cam undecided
Lakewood 70/30 front shocks with 1 coil cut of front spring
AJE K member
built 8.8 33 spline mosers strange single adjustable rear shocks
borg s475 T6 1.10AR
stock truck manifold flip
2.25 hot side piping
Looking forward to starting on this project parts should start rolling in any day now. We are not sure what to expect but hopefully its fun process and good time at the track in 2016. If you guys have any helpful pointers let me know, In mean time im searching forum for other fox swaps.
Holley HP efi
Holley 120# injectore
E98 fuel
Holley 12-1800 plus boost a pump
two 10an feeds to pump / 8an to the stock rails / 6an return
CX racing Air to Water Intercooler
VS racing BOV and Wastegates
LS 9 head gaskets
Gen 3 5.3 truck engine 200K miles
BTR 650 lift springs
cam undecided
Lakewood 70/30 front shocks with 1 coil cut of front spring
AJE K member
built 8.8 33 spline mosers strange single adjustable rear shocks
borg s475 T6 1.10AR
stock truck manifold flip
2.25 hot side piping
Looking forward to starting on this project parts should start rolling in any day now. We are not sure what to expect but hopefully its fun process and good time at the track in 2016. If you guys have any helpful pointers let me know, In mean time im searching forum for other fox swaps.
Thread Starter
Teching In
Joined: Jun 2012
Posts: 35
Likes: 0
Here is a few more parts. The PTC converter will be order monday and the TH400 is being built as we speak , We was initially going with a GLIDE but after doing so research found the TH400 better suited for this combination. Looking forward to more stuff being done! You can also get updates on more projects we have going on like dragster and saleen Modular ford at https://www.facebook.com/wwracecar/ stay tuned more to come on the LS setup...
