First turbo for jeep
#1
First turbo for jeep
Ok, I know this has all been beat to death through here, and Ive been seaching the past few days with no real answer. Ive always had an S/C and this will be my first turbo build. The engine is in my 4dr jeep with 1 ton axles and 40in tires. I have a built 4l60 with an 1800 stall. Right now the 4.8 has just 1.8 HS rockers but i will go back to 1.7 when i put the cam in.
2004 4.8 ls
64cc new ls1 heads with .660 rated double springs
I need a recommended camshaft for a 70mm turbo. I dont want to change the converter as i still want my power to start down low as i offroad frequently with it. But it is my daily still. Im running 4.88 gears currently with my lockers. Also, i would like to know if i can still use the MAF with the on3 single turbo kit? Any advice is welcomed, im not drag racing, but i still drive on the highway to the offroad sites. Thanks guys
2004 4.8 ls
64cc new ls1 heads with .660 rated double springs
I need a recommended camshaft for a 70mm turbo. I dont want to change the converter as i still want my power to start down low as i offroad frequently with it. But it is my daily still. Im running 4.88 gears currently with my lockers. Also, i would like to know if i can still use the MAF with the on3 single turbo kit? Any advice is welcomed, im not drag racing, but i still drive on the highway to the offroad sites. Thanks guys
Last edited by lsjeep52; 07-18-2016 at 06:44 AM.