2015 Z51 Corvette 9.58
#5
TECH Enthusiast
2015 Corvette Z51 LT1 A8 auto A&A YSI Full weight stock suspension 18" drag radial
https://youtu.be/0esKXNzR68Q
https://youtu.be/0esKXNzR68Q
Is that still with the stock cam/heads etc? It's making about 700rwhp..Pretty killer if it's a stock motor.
#6
Teching In
Thread Starter
Join Date: Jun 2015
Location: Stouffville
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#7
TECH Enthusiast
Nice combo...
My buddy has a 13' GS with cam/intake/exhaust and a Novi 1500 with the restrictor in it... Makes 9 psi. On a drag pack he went 9.56@143 with a 1.37 60' so pretty close to your combo. His made 700 rwhp
I assume you are not spinning that YSI that hard yet with the stock bottom end in it.
My buddy has a 13' GS with cam/intake/exhaust and a Novi 1500 with the restrictor in it... Makes 9 psi. On a drag pack he went 9.56@143 with a 1.37 60' so pretty close to your combo. His made 700 rwhp
I assume you are not spinning that YSI that hard yet with the stock bottom end in it.
Trending Topics
#8
Teching In
Thread Starter
Join Date: Jun 2015
Location: Stouffville
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Nice combo...
My buddy has a 13' GS with cam/intake/exhaust and a Novi 1500 with the restrictor in it... Makes 9 psi. On a drag pack he went 9.56@143 with a 1.37 60' so pretty close to your combo. His made 700 rwhp
I assume you are not spinning that YSI that hard yet with the stock bottom end in it.
My buddy has a 13' GS with cam/intake/exhaust and a Novi 1500 with the restrictor in it... Makes 9 psi. On a drag pack he went 9.56@143 with a 1.37 60' so pretty close to your combo. His made 700 rwhp
I assume you are not spinning that YSI that hard yet with the stock bottom end in it.
#9
Congrats on the times! Car runs good.
__________________
Aaron @ Scoggin Dickey Parts Center
Email:Aaron387@sdparts.com
Phone: 1-800-456-0211 Ext: 324
Aaron @ Scoggin Dickey Parts Center
Email:Aaron387@sdparts.com
Phone: 1-800-456-0211 Ext: 324