Another Data overlay video - re-edit from 2016 WCF
Thread Starter
TECH Enthusiast
Joined: Oct 2007
Posts: 530
Likes: 2
From: South Lyon, Michigan
Another Data overlay video - re-edit from 2016 WCF I redid the overlay video, with more data, that I had originally had put together from last years WCF. This is our 4th qualifying pass before eliminations. Enjoy.
Thread Starter
TECH Enthusiast
Joined: Oct 2007
Posts: 530
Likes: 2
From: South Lyon, Michigan
Thread Starter
TECH Enthusiast
Joined: Oct 2007
Posts: 530
Likes: 2
From: South Lyon, Michigan
It comes in quicker when he actually puts power to it. He's not leaning on it super hard.. he said he's got about 3-4 more degrees of timing to put in, and getting the timing in sooner is key to getting the X275 stuff to work.
The 88 only makes 26ish to 27 psi being the highest he's seen yet, with having the gates basically closed.
When he did the power wheelie against the Bruders in round 3, it was going 6MPH faster to the 60' and went 3.08 to the 330' on the rear tires.. it was on its way to a low 4.50 pass and possibly a 6.9x pass. Hopefully we'll get to do it again this year, with much less work having to be done.
The 88 only makes 26ish to 27 psi being the highest he's seen yet, with having the gates basically closed.
When he did the power wheelie against the Bruders in round 3, it was going 6MPH faster to the 60' and went 3.08 to the 330' on the rear tires.. it was on its way to a low 4.50 pass and possibly a 6.9x pass. Hopefully we'll get to do it again this year, with much less work having to be done.
Thread Starter
TECH Enthusiast
Joined: Oct 2007
Posts: 530
Likes: 2
From: South Lyon, Michigan
This is what happens when you don't get the rear shocks out fast enough... and don't have enough weight on the nose for the additional power you put in the car.
Apparently I can't post it to skip to 8:49 into the video.
Apparently I can't post it to skip to 8:49 into the video.
