Looking for good gear choices
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Dallas
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
Looking for good gear choices
Trying to wrap up some final items for my build, hoping you guys can suggest a proper rear gear for my setup. I was originally thinking 323s but I honestly am not sure with boosted applications. The 410s were killer with a cam only but obviously would be **** with twins.
MLRE 5.3
Twin Turbo Stage I Cam 222/231 .602"/.598" 112+4
Twin Precision 5858s .58 a/r ball bearing
6 Speed.
100% street car.
Will be getting a 12 bolt from Jason at TDP.
Thanks again for all the help, Nick
MLRE 5.3
Twin Turbo Stage I Cam 222/231 .602"/.598" 112+4
Twin Precision 5858s .58 a/r ball bearing
6 Speed.
100% street car.
Will be getting a 12 bolt from Jason at TDP.
Thanks again for all the help, Nick
#4
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Dallas
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
So this car will be a street car with no plans on bringing it to the strip other than a fun day at the 1/8 MAYBE. Is tire height as important to just roll around on the street?
Its a fun weekend project car.
Its a fun weekend project car.
#7
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Dallas
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
OK, so to play the tire size game, I will likely just put an ET Street Rs on the stock rims for now. P275/40R17 26.1 Diameter tire.
I can always change the rear gear later when I put a new set of rims and tires on the car. But for now it will be on stock speedlines and 275 tires for at least the first set.
I can always change the rear gear later when I put a new set of rims and tires on the car. But for now it will be on stock speedlines and 275 tires for at least the first set.