Maggie on an LS3
04-11-2018, 12:19 AM
#1
Teching In
Thread Starter
Join Date: Nov 2015
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Maggie on an LS3 I'm working through the measurements on my LS3 and toying with adding either a Maggie, Heartbeat or whipple. My clearances are different than most cuz I am running a metal Stinger hood.
According to LSX magazine, the Heartbeat is only 1-7/8" taller than the standard LS3 manifold. According to Magnuson, the jackshaft unit is just 3/4" taller than the Heartbeat. Whipples are just a touch taller.
Does anyone know how much higher is the throttle bodies are?
I'm getting all sorts of dimensions off Concept One, they don't centerline the throttle body and their overall dimensions seem a little low.
According to LSX magazine, the Heartbeat is only 1-7/8" taller than the standard LS3 manifold. According to Magnuson, the jackshaft unit is just 3/4" taller than the Heartbeat. Whipples are just a touch taller.
Does anyone know how much higher is the throttle bodies are?
I'm getting all sorts of dimensions off Concept One, they don't centerline the throttle body and their overall dimensions seem a little low.
