8.xxx for 8,xxx budget turbo LS sn95 - success
#1
8.xxx for 8,xxx budget turbo LS sn95 - success
alot of the reason why people follow or enjoy what i do is the economical part of it, i submit, my 8s for 8 project
albiet long winded as ****, most people ( i would like to think) enjoy this type of thing...
currently at 7500~ looking good for video 2 to come out soon, its all gunna go fast from here
albiet long winded as ****, most people ( i would like to think) enjoy this type of thing...
currently at 7500~ looking good for video 2 to come out soon, its all gunna go fast from here
Trending Topics
The following users liked this post:
wicked z28 (12-10-2019)
#9
8 Second Club
iTrader: (13)
I think its possible:
Gen 4 5.3L - $600
Chang T6 88mm - $750
Chang 60mm wastegate - $50
Holley EFI HP - $1500
Bosch 210's - $300
Your at $3,200 in the powerplant, leaves a solid $2k for a nice TH400 or glide, and about $3k for a roller and incidentals.
Similar project going on with a friend, 8's for under $10k. Bought a proven 88mm turbo 5.3 setup for cheap, Th400/converter out of a 7 sec car, $500 roller, jegs wheels, holley hp efi, k member, etc all used deals.
Gen 4 5.3L - $600
Chang T6 88mm - $750
Chang 60mm wastegate - $50
Holley EFI HP - $1500
Bosch 210's - $300
Your at $3,200 in the powerplant, leaves a solid $2k for a nice TH400 or glide, and about $3k for a roller and incidentals.
Similar project going on with a friend, 8's for under $10k. Bought a proven 88mm turbo 5.3 setup for cheap, Th400/converter out of a 7 sec car, $500 roller, jegs wheels, holley hp efi, k member, etc all used deals.
#13
#17
TECH Apprentice
is that counting all the saftey equipment rollcage etc etc etc ?