900+ hp, silverado long-bed.
#1
Launching!
Thread Starter
Join Date: Apr 2010
Location: Sand Springs, OK
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
900+ hp, silverado long-bed.
This is a older build which I post here every year or two.
But, if anybody is interested in seeing the status/progress of a 900+ hp, ugly, long bed silverado sleeper, here is the full build documentation:
https://xtremeownage.com/index.php?t...e-racecar.323/
Current projects include:
1. Fabricating the rest of the dash, mounting gauges, lights.
2. Transmission is back from TCI, install will be done friday.
3. new catch can/pcv system.
4. Configuring the holley HP for boost control.
5. Installing a new rear-main seal.
To grab your attention, here is a data log I pulled from before I nuked the tranny.
Slamming gears at 7,300 rpms, under ~20psi. AFR stayed in the 11-11.7 range under boost.
But, if anybody is interested in seeing the status/progress of a 900+ hp, ugly, long bed silverado sleeper, here is the full build documentation:
https://xtremeownage.com/index.php?t...e-racecar.323/
Current projects include:
1. Fabricating the rest of the dash, mounting gauges, lights.
2. Transmission is back from TCI, install will be done friday.
3. new catch can/pcv system.
4. Configuring the holley HP for boost control.
5. Installing a new rear-main seal.
To grab your attention, here is a data log I pulled from before I nuked the tranny.
Slamming gears at 7,300 rpms, under ~20psi. AFR stayed in the 11-11.7 range under boost.