Forced Induction Superchargers | Turbochargers | Intercoolers

T4 to T6

Reply Subscribe

Search this Thread

Old

Jul 22, 2019 | 10:05 AM

#1

Thread Starter

9 Second Club

iTrader: (4)

Joined: Dec 2013

Posts: 154

Likes: 7

Default

T4 to T6

Has anyone used a t4 to t6 adapter on their current hot side piping ? Have you noticed any problems or regrets of not just redoing the hot side.

Old

Jul 22, 2019 | 10:29 AM

#2

8 Second Club

iTrader: (13)

Joined: Jan 2010

Posts: 4,025

Likes: 953

From: No VA

Default

I used one, if your hotside is already proper size then the biggest restriction is still the turbine. Plenty of people run stock manifolds and 2" pipes to either turbo flange with good results.

One I used was like this, as you can see its not a huge difference and its contoured to flow well:

Old

Jul 23, 2019 | 08:49 AM

#3

Thread Starter

9 Second Club

iTrader: (4)

Joined: Dec 2013

Posts: 154

Likes: 7

Default

I have 2" running into 2 1/2" now. Was curious if that had to be redone to adapt to make it work well. Thanks

Old

Jul 23, 2019 | 06:36 PM

#4

12 Second Club

iTrader: (5)

Joined: Mar 2006

Posts: 1,457

Likes: 3

From: Yorba Linda, CA

Default

You'll be fine with that setup.

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Show Printable Version

Email this Page

Email this Page

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 02:58 PM.