Turbo manifolds
Thread Starter
Teching In
Joined: Sep 2004
Posts: 6
Likes: 0
From: Valdosta
Turbo manifolds I plan on doing a gen 3 swap into an old truck. I would like to turbo charge it too but I just need the hot parts. I cant find them any where by themselves if some one could point me in the right direction I would be very happy. Sorry if the thread has been done before I didn't see it if it has.
Thanks
Thanks
Check out turbomustangs.com for ideas/parts/info...at least they could tell you where to look.
And the easiest/cheapest thing to do is find some decent stock manifolds or shorty headers with a respectable ga. steel and use/modify them.
I was able to cut flanges out here at work on our laser to make my stuff and could get you to send me a .dxf for what you want but it is currently not working all the time and when it is, there isn't any time for "special" parts to be cut
And the easiest/cheapest thing to do is find some decent stock manifolds or shorty headers with a respectable ga. steel and use/modify them.
I was able to cut flanges out here at work on our laser to make my stuff and could get you to send me a .dxf for what you want but it is currently not working all the time and when it is, there isn't any time for "special" parts to be cut
