What boost control should I go with for under $400???
Thread Starter
On The Tree
Joined: Nov 2004
Posts: 135
Likes: 0
From: Chicago
What boost control should I go with for under $400??? I just bought the CAS TT Kit for my 2000 TA, WS6 A4, so I will have it installed in 2 weeks. But I will need an electric/automatic boost control for inside the car under $400. Do you guys have any suggestions??? My friend has in his ride this one;
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742
Please send a link or pic if all is possible.. I am going to be at 8PSI to start with. Thanks!!
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742
Please send a link or pic if all is possible.. I am going to be at 8PSI to start with. Thanks!!
9 Second Club
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
At such low boost pressures, a simple bleed valve would do, if indeed it was necessary at all.
The Apexi is very good, but very difficult to setup.
Go for something simple like the Greddy Profec B Spec 2
The Apexi is very good, but very difficult to setup.
Go for something simple like the Greddy Profec B Spec 2
I had that one in my 300zx. Did't like it much to tuff to tune in right. When it was all said and done I put the boost jets back in and it felt better then the apexi. I like the old ball and spring ones, makes the boost come in fast.
Originally Posted by Slowhawk
I like the manual valve bleed myself.Holds pressure very well and too easy to use(nevermind,under $20)
Cheers,
Mark
TECH Fanatic
Joined: Nov 2001
Posts: 1,190
Likes: 0
From: Las Cruces, NM
Originally Posted by Slowhawk
I like the manual valve bleed myself.Holds pressure very well and too easy to use(nevermind,under $20)
A bleeder will work but it slows the spool down plus won't give a consistant set point.
Gary
