Sparkplug wire question...need to make custom ones.
Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
Sparkplug wire question...need to make custom ones. Well I was buttoning things up today under the hood and found two of my wires come into contact with the headers
Looks like I need to make some new plug wires. Anyone have PN's for the boots that go onto the coil packs or where to get em from???? I have the Jay Fisher Coil relocation kit on my car so I'll just use a standard SBC wire set with 90 deg boots for those two wires and regular straight boots for the others. I posted this here in the FI board because I'm sure a few of our turbo members have been down this road before
Any help on the PN's for the boots to the coils and any other items I might need to get another part of this install done
On a side note, the heat shielding is going nicely.
Looks like I need to make some new plug wires. Anyone have PN's for the boots that go onto the coil packs or where to get em from???? I have the Jay Fisher Coil relocation kit on my car so I'll just use a standard SBC wire set with 90 deg boots for those two wires and regular straight boots for the others. I posted this here in the FI board because I'm sure a few of our turbo members have been down this road beforeAny help on the PN's for the boots to the coils and any other items I might need to get another part of this install done
On a side note, the heat shielding is going nicely.
Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
doubt it, but I do have 10.5mm wires on the car so that could be an issue...but two of the plug boots are resting on the header tubes because of the tight bends the headers have to make. If I had 90 deg plug boots on em or even 45's I'd be good....
J
J
dont get SBC wires, get a set of LT1 universals, they come with the correct ends on them already.
In fact if you need some I have some in stock(at my house) that I am not going to be using I could get to you pretty affordably
ed
firebird455@gmail.com
In fact if you need some I have some in stock(at my house) that I am not going to be using I could get to you pretty affordably
ed
firebird455@gmail.com
