How you guys running PCV?

Reply Subscribe

Thread Tools

Search this Thread

Jun 23, 2005 | 08:38 PM

BOOSTNSS

Thread Starter

Banned

iTrader: (1)

Joined: May 2005

Posts: 280

Likes: 0

From: Bourne Mass

How you guys running PCV?

Hey i just got my car together but need to do sometihng with either a checkvalve/ catch can or breather set up help me out how are you running your setup?
Thanks Derek

Jun 23, 2005 | 08:46 PM

dynedta

chronic masturbator

iTrader: (4)

Joined: Dec 2003

Posts: 699

Likes: 0

From: massillon, ohio

on my old powerdyne setup I ran a hose from each valve cover to a catch can and connected the other end of the catchcan to the inlet side of the blower, you could either do it that way or just let it vent to the atmosphere, as far as the nipples on the intake i just capped them off. there are many ways to skin a cat

Jun 24, 2005 | 04:28 AM

BOONE

TECH Enthusiast

iTrader: (4)

Joined: May 2004

Posts: 565

Likes: 0

From: council bluffs Iowa

pcv

Hey im with him, and never any oil in my catch can. The only diff is i have a clear filter after the catch can, to catch any remaining oil before the blower.
I have vapor discoloration on the lines, but only change the filter from this about every 4 to 5000 miles. My inlet hat is always clean and dry. And no pcv at all...