Phamspeed Kit, here are the pictures of mine
Phamspeed Kit, here are the pictures of mine Hi,
Well after about 4 months of waiting I finally got the kit this week. It appears to be worth the wait. Im happy, once its on the car I will be overwhelmed with joy.
Its a T-76GTSH, I knew the turbo was going to be big, I suppose I just didnt think about it. But this turbo is REALLY big.
Thanks for reading
Ed
Well after about 4 months of waiting I finally got the kit this week. It appears to be worth the wait. Im happy, once its on the car I will be overwhelmed with joy.
Its a T-76GTSH, I knew the turbo was going to be big, I suppose I just didnt think about it. But this turbo is REALLY big.
Thanks for reading
Ed
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Yes its the budget kit, with shorty headers
CAT3-yeah id love to bolt it on the car, however without a motor it really wont workout too well
Red90cobra- yeah car is so dirty im sorry you guys had to see this much of it
Stoleit-the kits dont come with cold side parts. I ordered my kit before they made the cold side parts. This was back when phamspeed said we just dont do cold side.
thanks for the kind words
Ed
CAT3-yeah id love to bolt it on the car, however without a motor it really wont workout too well
Red90cobra- yeah car is so dirty im sorry you guys had to see this much of it
Stoleit-the kits dont come with cold side parts. I ordered my kit before they made the cold side parts. This was back when phamspeed said we just dont do cold side.
thanks for the kind words
Ed
Well assuming the cam arrives, I goto pick up the short block next saturday.
HPE is building me a nice stock CI motor. I have the heads here at the house.
Only things I am going to need now is.
-fan
-radiator cap
-misc gaskets
-decision on tranny setup
-going to have an A2W intercooler made
-Have to send the Mega off to have converted to Low Z injectors
-Install all the crap(easier said than done)
-Cold side piping
-TUNE
and its my car in the Pic, yes there telestars, they look mean as hell on the car, I think, should look even better with the front end lowered back down.
anything else, pretty basic setup, hope itll make at least 450 to the wheels
ed
HPE is building me a nice stock CI motor. I have the heads here at the house.
Only things I am going to need now is.
-fan
-radiator cap
-misc gaskets
-decision on tranny setup
-going to have an A2W intercooler made
-Have to send the Mega off to have converted to Low Z injectors
-Install all the crap(easier said than done)
-Cold side piping
-TUNE
and its my car in the Pic, yes there telestars, they look mean as hell on the car, I think, should look even better with the front end lowered back down.
anything else, pretty basic setup, hope itll make at least 450 to the wheels
ed
Originally Posted by 69firebird
Well assuming the cam arrives, I goto pick up the short block next saturday.
HPE is building me a nice stock CI motor. I have the heads here at the house.
Only things I am going to need now is.
-fan
-radiator cap
-misc gaskets
-decision on tranny setup
-going to have an A2W intercooler made
-Have to send the Mega off to have converted to Low Z injectors
-Install all the crap(easier said than done)
-Cold side piping
-TUNE
and its my car in the Pic, yes there telestars, they look mean as hell on the car, I think, should look even better with the front end lowered back down.
anything else, pretty basic setup, hope itll make at least 450 to the wheels
ed
HPE is building me a nice stock CI motor. I have the heads here at the house.
Only things I am going to need now is.
-fan
-radiator cap
-misc gaskets
-decision on tranny setup
-going to have an A2W intercooler made
-Have to send the Mega off to have converted to Low Z injectors
-Install all the crap(easier said than done)
-Cold side piping
-TUNE
and its my car in the Pic, yes there telestars, they look mean as hell on the car, I think, should look even better with the front end lowered back down.
anything else, pretty basic setup, hope itll make at least 450 to the wheels
ed
Ed
send me some pics of the car with the wheels on if ya got them. PM me to keep this thread on topic.
Kyle
as long as I have time to work on it ill be fine, and youll all see some more pics.
Its hard to get enough time to complete anything right now, between working full time, going to get my masters, and trying to get this car done, its hard to make time for the car with the other stuff in the way.
ed
Its hard to get enough time to complete anything right now, between working full time, going to get my masters, and trying to get this car done, its hard to make time for the car with the other stuff in the way.
ed
