LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Forced Induction
What size pulley?

Forced Induction Superchargers | Turbochargers | Intercoolers

What size pulley?

Reply Subscribe

Search this Thread

Old

Sep 14, 2005 | 08:42 PM

#1

Thread Starter

Teching In

Joined: Feb 2005

Posts: 11

Likes: 0

Default

What size pulley?

Have a D1 procharger with a 4.75 pulley. Stock motor, stock manifolds, Borla catback. Car only makes 4lbs boost with this pulley. What size pulley will I need to get it to make the 8lbs it was supposed to make? Any info would be appreciated

Old

Sep 14, 2005 | 10:02 PM

#2

2000silverbullet

TECH Regular

iTrader: (5)

Joined: Jul 2002

Posts: 486

Likes: 0

From: Alabama

Default

Do you have a 6 rib set up or 8 rib set up?
Any belt dust?
What size crank pulley?

Old

Sep 14, 2005 | 10:15 PM

#3

FormerVendor

Joined: Aug 2005

Posts: 531

Likes: 0

From: Decatur IN.

Default

thats a big pulley dude, usually with a 4.5 on bone stock we will see 7# by 5000 you should be able to run a 4.25 with good tuning and get upwards of 450 hp..

Old

Sep 14, 2005 | 10:31 PM

#4

TECH Fanatic

iTrader: (361)

Joined: Aug 2004

Posts: 1,704

Likes: 2

From: Lomita CA

Default

I can tell you this, if you have a 8 rib and a 7&5/8 crank pulley I would go with at least a 3.8 or 3.7. Iam running a 3.7 and see a good 8 to 9 psi.

Cant say much for a 6 rib and drive.

Old

Sep 15, 2005 | 11:17 AM

#5

Thread Starter

Teching In

Joined: Feb 2005

Posts: 11

Likes: 0

Default

It is an eight rib set up with a 7 5/8 crank pulley and I see no signs of belt slip

Reply Subscribe

ls1, pulley, size, stock

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 03:56 AM.