Still waiting on parts
Thread Starter
On The Tree
Joined: Dec 2001
Posts: 133
Likes: 0
Still waiting on parts Man I am still waiting on parts.
Goldenwest told me they sent out their instructions to me twice but I still haven't got them. Also My blower belt was sent to me USPS right after x-mas and I still haven't got that. And then Thunder's cam grinder messed up my cam. Looks like all the bad luck is falling on me.
Superchips did get their tuning to me in no time though. That blower is begging me to put her on. Well looks like it might be a little longer till we have a Stage III GW/ATI car. Also I was thinking of running bullet mufflers and maybe even getting a built 700R4 to handle all this. Any comments on any of this. Im sure my Star Spec III clutch ain't gonna like this D1 and neither is my stock bottomend
I bet the 12 bolt will hack it.
PS rock i know you said keep the fuel pump close to the plastic lines, guess that rules out putting it right under the Lisence plate. Do you have any pics of your fuel setup under the car? Would be cool to se some big stainless stell line running from a fuel pump under the bumper.
(i know im a big rice boy
Goldenwest told me they sent out their instructions to me twice but I still haven't got them. Also My blower belt was sent to me USPS right after x-mas and I still haven't got that. And then Thunder's cam grinder messed up my cam. Looks like all the bad luck is falling on me.
Superchips did get their tuning to me in no time though. That blower is begging me to put her on. Well looks like it might be a little longer till we have a Stage III GW/ATI car. Also I was thinking of running bullet mufflers and maybe even getting a built 700R4 to handle all this. Any comments on any of this. Im sure my Star Spec III clutch ain't gonna like this D1 and neither is my stock bottomend
I bet the 12 bolt will hack it.
PS rock i know you said keep the fuel pump close to the plastic lines, guess that rules out putting it right under the Lisence plate. Do you have any pics of your fuel setup under the car? Would be cool to se some big stainless stell line running from a fuel pump under the bumper.
(i know im a big rice boy
TECH Apprentice
Joined: Nov 2001
Posts: 301
Likes: 0
From: Woodlyn, PA
Re: Still waiting on parts I thought about taht too.. but the only way you'll be able to put it there is if you get a sump for your tank. You don't know how badly I want to do it too. Except for hanging the fuel pump in the open. <img src="gr_stretch.gif" border="0">
-10 all the way up with some custom rails would RULE.
I don't have pictures because I broke my $250 in less than a week of ownership. <img src="graemlins/gr_cry.gif" border="0" alt="[whiner]" />
However I DO have pictures stored on the memory card.
Just try to put it in the indentation where the fuel filter is. I didn't because it looked a little tight, but it's gotta be possible since that's what GWP intended judging by the hose lengths.
[ January 14, 2002: Message edited by: Rock ]</p>
-10 all the way up with some custom rails would RULE.
I don't have pictures because I broke my $250 in less than a week of ownership. <img src="graemlins/gr_cry.gif" border="0" alt="[whiner]" />
However I DO have pictures stored on the memory card.
Just try to put it in the indentation where the fuel filter is. I didn't because it looked a little tight, but it's gotta be possible since that's what GWP intended judging by the hose lengths.
[ January 14, 2002: Message edited by: Rock ]</p>
On The Tree
Joined: Jan 2002
Posts: 158
Likes: 0
From: antioch
Re: Still waiting on parts well, get used to it. Everytime I called to check on my shipment, I always go the same story. We shipped it out already. They must have shipped me my stuff 10 times over. Funny how they could never give me a tracking number though. They have a good product, but I wasnt impressed with their customer support. Just my opinion.
P.S. I never got any instructions.
P.S. I never got any instructions.
